Weak Concrete Blamed in Taiwan High-Rise Collapse


Weak, watered-down concrete was likely used in the Weiguan Jinlong complex that collapsed in the Feb. 6 earthquake, academics and industrial representatives said yesterday, calling on the Ministry of Interior’s Construction and Planning Agency to randomly sample the concrete used in major construction projects to deter such practices.

Get Your First SmartRock Concrete Sensor for FREE

Giatec SR demo kit_
Giatec SR demo kit_

The Taiwan Concrete Institute and Taiwan Ready-mixed Concrete Industry Association held a news conference at National Taiwan University (NTU) to call for regulatory reform. Chan Yin-wen (???), a professor of civil engineering at the university and the institute’s executive director, said that while some media reports on the complex’s collapse focused solely on possible problems with its steel beams, photographs taken at the site suggest that weak, watered-down concrete was also a factor in the building’s collapse.

The collapse of the 17-story complex in Tainan’s Yongkang District (??) caused 115 deaths, as one more body was found yesterday, and was the largest source of casualties in the magnitude 6.4 earthquake. “The exterior of the broken steel beams [found in the rubble] are smooth and have very little concrete attached to their surface. This shows that the concrete used in the building’s construction was not strong enough to effectively reinforce the steel beams when the earthquake struck, causing them to snap,” Chan said, adding that another factor that might have contributed to the collapse could be the use of too little concrete.

While an official examination of the building is ongoing, an academic survey of more than 1,000 buildings damaged in the 921 Earthquake in 1999 found that the quality of concrete was directly related to damage, Chan said, adding that concrete in 88 percent of the damaged buildings surveyed in 1999 failed to meet regulatory standards. Price competition, combined with poor accountability, encourages developers to take shortcuts, such as watering down concrete to cut costs and make pouring easier, he said. “The responsibility of architects to supervise construction has not been realized because it is unclear and no authority enforces the standards. After a developer constructs and sells a building, they can be cleared of any responsibility if they change their company’s name and keep on building through other means,” he said.

“The problem is that while they might be saving several hundred New Taiwan dollars per ping [3.3 m2], they are endangering a consumer value of up to NT$50,000 per ping [for houses in Taipei and New Taipei City],” he said.
The institute and the association recommended the Construction and Planning Agency conduct random sampling of the concrete used in major construction projects and publicize any sub-standard results along with other projects that had been developed by the company.

Companies caught cheating would find it difficult to sell properties in completed buildings, making them think twice before taking shortcuts, Chan said, adding that use of sub-standard materials in public construction projects dropped sharply after random sampling was introduced.The institute and association also recommended that “production resumes” for concrete used for buildings be compiled and publicized, as well as amendments made to the Building Act (???) to clarify responsibility for supervision and quality control of construction projects.

Source: http://www.taipeitimes.com/News/taiwan/archives/2016/02/19/2003639727

Related Articles

cement vs concrete

Back to Basics: Cement vs Concrete

How many times have you heard people use the words cement and concrete interchangeably? Probably enough for you to wonder if there is a difference at all. While there are some ways in which the terms are related, the answer is simple: concrete and cement are fundamentally different. In this blog we will discuss all you need to know to answer the question: cement vs concrete, are they different?

concrete testing lab

Revolutionizing Third-Party Concrete Testing with SmartRock® Wireless Sensors

Often, third-party testing agencies face several challenges with standard temperature and strength monitoring systems. Some of these involve relying on multiple wired components and expensive concrete monitoring systems. Subsequently, concrete testing lab facilities require extra time to produce accurate data, and this presents a burden when contractors need this information right away.  Get Your First SmartRock Concrete Sensor for FREE Free Demo Kit How Can Technicians Solve This Challenge? SmartRock is the world’s leading wireless sensor for monitoring concrete curing and hardening. This fully embedded sensor…

Book your meeting with us at World of Concrete,
January 17-19, 2023

The Big 5

Book your meeting with us at The Big 5, December 5-8

We use cookies to provide you with a better experience, analyze site traffic and assist in our marketing efforts. By continuing to use this website, you consent to the use of cookies in accordance with our Privacy Policy Page.