Fully embedded on the rebar with no wires or testing labs required, this easy-to-use, hassle-free sensor allows for quick decision making onsite and prevents unnecessary setbacks.
The maturity method, used by SmartRock, is approved by ASTM and ACI as an accurate and reliable test for measuring concrete strength onsite for more accurate results than field-cured cylinder breaks.
With real-time data and 24/7 remote monitoring capabilities, confidently check the status of your pour and get notifications anytime, anywhere, on any device.
The frequency and amount of time you take to record concrete temperature on any project is exhausting. You want an easy way to report on the maximum, minimum, and temperature differential of your placed concrete without relying on painstakingly wired systems and data loggers. With SmartRock you get highly accurate data directly on your phone in real time!
Use SmartRock to:
Frustrated with knowing your concrete has reached target strength but you can’t move your project ahead until you get the official data from the break tests? With SmartRock, you can monitor the strength of your placed concrete in real time on your phone. Reduce or eliminate your reliance on field-cured cylinders (or cubes) and potentially deliver your project ahead of schedule and under budget.
Use SmartRock to:
Check out our SmartRock® 2 product page
Activate the sensor and tag each one in your SmartRock app by project and section.
Secure the sensor to the rebar in the formwork and pour concrete as usual.
Open the SmartRock app to view concrete strength and temperature data in real-time or remotely using SmartHub.
|Reading Range||-22 to +181 °F (-30 to 85 °C)|
|Measurement Accuracy||± 1.8 °F (± 1°C)|
|Measurement Resolution||± 0.18 °F (± 0.1°C)|
|Measurement Frequency||Once every 15 mins (for 2 months of data)|
Wireless Signal Range
|Up to 40 ft (12 m) For longer range options, contact us.|
|Temperature Cable Length||12 in (30 cm) / 10 ft (3 m) / by request: 50 ft (15.2 m)|
|Battery Life||Up to 4 months after installation|
|Dimensions||L: 3 1/8″ (80 mm)|
W: 1 5/8″ ( 42 mm)
H: 1 1/32″ (26 mm)
|900130||SmartRock® Sensor||Sensor with 12 inch (30 cm) temperature cable, free iOS and Android application for Smartphone and Tablet, Quick user guide|
|900132||SmartRock®-L Long Cable Sensor||Sensor with 10 feet (3 m) temperature cable, free iOS and Android application for Smartphone and Tablet, Quick user guide|
The design of the SmartRock 3 sensor enables measuring temperature at the tip of the white cable (temperature probe) and on the body of the sensor (the black transmitter). On the sensor page of the SmartRock application or the Giatec 360 platform, users can toggle between the two temperature values identified as “cable” and “body” at the top of the page. The temperature graph will display both temperature profiles and will highlight the difference between the measurement points.
The sensor transmitter must be installed no more than 2 inches (5 cm) from the concrete surface. This is to enable strong wireless signal strength for continued connectivity to the sensor, even long after it has been installed in concrete.
When the sensor is installed inside concrete as recommended, it can transmit up to 40 ft (12 m). When the black transmitter is exposed, the range of the wireless signal can be up to 100 ft (30 m).
The sensor takes a measurement every 15 minutes, allowing it to collect data for 2 months. However, the battery life extends for up to 4 months. This enables the user to retrieve the data for an extra 2 months once the memory is full.
Yes. The sensors can be turned off to preserve battery and memory until the start of the pour, this is done by inserting the temperature probe back into the sensor body.
Yes. Please ask for customized length options when you are ordering your SmartRock package.
The SmartRock 3 is available in two different lengths; the shorter cable has a length of 12 in (30 cm), while the longer cable can measure concrete temperature up to 10 ft (3 m) inside your concrete structure. Contact our team if you are not sure what sensor would be the best suited for your application.
The QR code on the SmartRock 3 sensor is a feature for tagging sensors on the mobile application. The application will guide you through adding new sensors to your projects. To do so, the application will prompt you to scan the QR code on the sensor.
Anytime the temperature probe (the white cable) is removed from the sensor, this activates the sensor. The LED light located on top of the sensor body will blink 3 times to indicate that the sensor was properly activated and is ready to be used.
The SmartRock 3 has three main physical components, the white cable, the sensor body, and a rubber installation strap. The activation and installation procedure was enhanced from 2 metal wires that were twisted around the rebar in the SmartRock 2 generation, to a rubber strap meant to tightly install and secure the sensor. The installation strap was specially designed to install the sensors on different sizes and types of rebar. It can also withstand 40 lbs of force.
The SmartRock – Long Range has an additional wireless communication capability compared to the SmartRock. This means it can be used in the exact same way as the SmartRock with the addition of long-range capabilities for remote monitoring with the SmartHub – Long Range.
Only SmartRock – Long Range sensors are compatible with the SmartHub – Long Range. Remote monitoring with SmartRock requires the SmartHub.
Yes, both the SmartRock and SmartRock – Long Range collect data every 15 minutes for two months. It is also possible to connect to the sensors and collect stored data from up to 4 months (for the duration of its battery life).
Get Your First SmartRock Concrete Sensor for FREE