BlueRock™ | Concrete Humidity Sensor

Concrete Humidity Sensor

Giatec BlueRock™ is a rugged waterproof sensor for wireless monitoring the relative humidity and temperature of concrete from fresh stage to hardened stage.

BlueRock™ can be placed in the concrete at the pouring time to monitor the temperature and humidity of concrete in-situ. The continuous measurements are recorded on the BlueRock™ memory and can be downloaded at any time during the concrete setting and hardening using BlueRock™ mobile app on smartphone/tablet.

The continuous monitoring of concrete relative humidity and temperature can be used as a QC/QA method. Knowing the level of humidity in the concrete, flooring companies can decide on the timing of installation of floor covering (such as resilient flooring, epoxy coating, or wood) based on the type of concrete materials. Unlike the current time-consuming methods that measure only one data point at the testing time through drilling a hole in concrete, BlueRock™ offers and embedded wireless solution for continuous measurement and accurate monitoring of humidity variations in concrete over time.

BlueRock™ wireless concrete humidity sensor BlueRock™ overview BlueRock™ mobile app BlueRock™ mobile app BlueRock™ mobile app

remove_circle_outlineadd_circle Applications

BlueRock™ can be used to monitor the temperature and humidity of fresh and hardened concrete. This can provide information on:

  • Drying level in concrete floors
  • Effectiveness of curing conditions
  • Optimization of flooring installation
  • Water penetration in concrete
  • Monitoring of humidity gradients

remove_circle_outlineadd_circle Features


  • Wireless technology
  • Rugged and waterproof design
  • Continuous measurement and recording of temperature and humidity (once every 8 hours)
  • Easy installation and activation through tying the wires together
  • Long battery life (up to 6 months after installation)
  • Patents pending


  • Real-time data display (e.g. humidity and temperature)
  • Free Android and iOS apps for smartphone and tablet
  • Interactive plotting of data
  • Easy data sharing
  • Full report generation in csv format

remove_circle_outlineadd_circle Technical Specifications


Reading RangeAccuracyWireless Signal RangeDimensions
Temperature: -30 to +60 °C (-22 to +140 °F)±1 °C
Relative Humidity: 0 ~ 100 %20 to 80%, ±2%
<20% or >80%, ±3%
Hysteresis ±1%
Up to 6-8 meters
(20-26 feet)
39 x 39 x 20 mm
(1.5 x 1.5 x 0.7 inches)
1 Accuracies are tested at Outgoing Quality Control at 25°C and 3.0V. Values exclude hysteresis and long term drift and are applicable to non-condensing environments only.
2 The wireless communication range is reduced as the sensor is embedded deeper in the concrete. The maximum recommended concrete depth for embedding the sensor in the field is 5 cm. At this depth, the user can communicate with the sensor within a couple of meters.
3 Normal operating range: 0-80%RH, beyond this limit sensor may read a reversible offset with slow kinetics (+3%RH after 60h at humidity >80%RH).
Note: Specifications are subject to change without notice.

remove_circle_outlineadd_circle Purchase Items

Part No.ItemDescription
900068BlueRock™ sensorTemperature and relative humidity temperature for monitoring fresh concrete in real-time.

remove_circle_outlineadd_circle Reviews

Submit your review

Create your own review

Average rating:  
 0 reviews
SmartRock2 sensors save time and money on the jobsite.Show me my Savings
+ +